News新闻动态 / 2024

2024.11.22News新闻

Test beam at PSI for muon trigger detector缪子触发探测器PSI束流测试

From late October to early November 2024, our group took part in a test beam campaign at PSI to evaluate the performance of the prototype muon trigger detector developed for the muEDM experiment. This was our second beam test at PSI for the muEDM project, in which we tested an improved design tailored for operation in high magnetic fields.

A huge shoutout to Tianqi Hu and Guan Ming Wong for their hard work and dedication in building this cutting-edge, highly reliable muon trigger detector. Their efforts have been instrumental in advancing the detector’s performance under challenging experimental conditions. We will analyze the collected data over the next few months to evaluate the detector’s performance.

Test beam at PSI for muon trigger detector — photo 1
Test beam at PSI for muon trigger detector — photo 2
Test beam at PSI for muon trigger detector — photo 3
Test beam at PSI for muon trigger detector — photo 4
Test beam at PSI for muon trigger detector — photo 5
Test beam at PSI for muon trigger detector — photo 6
Test beam at PSI for muon trigger detector — photo 7
Test beam at PSI for muon trigger detector — photo 8
Test beam at PSI for muon trigger detector — photo 9

2024年10月下旬至11月初,课题组赴瑞士保罗谢勒研究所(PSI)参加束流测试,检验为muEDM实验研制的缪子触发探测器原型的性能。这是我们为muEDM项目在PSI开展的第二次束流测试,此次测试了专为强磁场环境运行而改进的设计方案。

特别感谢胡天齐和黄冠铭为研制这一先进、高可靠性的缪子触发探测器所付出的辛勤努力。他们的工作对提升探测器在严苛实验条件下的性能起到了关键作用。未来几个月,我们将对采集的数据进行分析,以评估探测器性能。

缪子触发探测器PSI束流测试 — photo 1
缪子触发探测器PSI束流测试 — photo 2
缪子触发探测器PSI束流测试 — photo 3
缪子触发探测器PSI束流测试 — photo 4
缪子触发探测器PSI束流测试 — photo 5
缪子触发探测器PSI束流测试 — photo 6
缪子触发探测器PSI束流测试 — photo 7
缪子触发探测器PSI束流测试 — photo 8
缪子触发探测器PSI束流测试 — photo 9